This forum is now read-only
To login to the new support channel and community forums, go to the Support Portal
Water leakage from the water pipeline
Hi all
For quite some time I'm noticing water leakage from the butom of the machine. I guess that maybe the water pipeline is invalid inside the machine any suggestion how to deal with it if I need to open the butom cover of the machine - do I need to take any Preventive steps?
Ziv.
For quite some time I'm noticing water leakage from the butom of the machine. I guess that maybe the water pipeline is invalid inside the machine any suggestion how to deal with it if I need to open the butom cover of the machine - do I need to take any Preventive steps?
Ziv.
Comments
have the machine on so the system is hot and up to pressure
unplug the machine from the wall
take the panels off
if you have a tank machine it is most like to be the clear silicone tubing that is the source of the leak, in which case you might get away with just taking off the top and side panel and shining a torch in at a low angle across the top of the bottom plate of the chassis
that should allow you to see the leak fairly quickly
reiss.
It's not a tank machine, it's the plumed version.
I think there is a leakage from the water pipeline that connects the machine to the water source.
Any idea - how should I open the bottom of the machine?
Ziv
unplug
take the top and a side or two off, and the back if you think it will make your life easier
and then you will be able to see where it is leaking from
kind regards
reiss.
furthermore, on the attached photo there is some kind of ring - what is this ring? should it be like that?
ziv
leave the machine on until the leak appears, then unplug and remove the panels
best
reiss.